Back to News

Scale and corrosion control in boiler and cooling water

10 Sep 2026

Scale and corrosion control in boiler and cooling water

Water that heats up, cools down and evaporates leaves things behind. Dissolved calcium, magnesium and silica become scale on hot surfaces, while dissolved oxygen and low pH attack the metal itself. Both problems cost energy and shorten the life of boilers, heat exchangers and pipes.

Scale inhibitors, such as phosphonates and polymers, work at very low doses. They interfere with crystal growth so that hardness salts stay dissolved or form soft particles that do not stick to the surface.

Dispersants keep suspended solids, iron oxides and silt apart so that they can be removed with the blowdown instead of settling as deposit. They are often dosed together with the scale inhibitor.

Corrosion inhibitors form a thin protective film on the metal or change the water chemistry at its surface. In boilers, oxygen scavengers and pH-raising amines are used for the same purpose. In open cooling systems, a biocide is usually added as well, because biological films cause deposits and corrosion under them.

The right programme depends on water quality, operating temperature, the number of cycles of concentration and the metals in the system. Ask your supplier for the product data sheet and dosing range, test the water regularly, and adjust the dose to the results rather than to a fixed habit.

Chat with us
Chat on WhatsApp